Installation Guide

1. Install the Escutcheon (Optional)

For 1-hole Installations

Use the appropriate washer (provided).

For 3-hole Installations

NOTE: When installing in marble countertops, use the gaskets

provided. Remove the adhesive backing and apply the gaskets over

the unused sink holes with the adhesive side down.

Apply a bead of plumbers putty or other sealant to the underside

of the escutcheon according to the manufacturer’s instructions.

Insert the O-ring into the groove of the spacer.

Set the spacer with gasket under the center hole of the escutcheon

with the gasket in position to make contact with the countertop.

Align the center hole of the escutcheon with the center hole of the

sink.

Apply

plumbers

putty.

Spacer with

Gasket

Center Hole

Sink

Optional Escutcheon

Spacer

O-Ring

Kohler Co. 3 1015073-2-E