Installation Guide

3. Install the Supplies
NOTE: If the sink is not installed, install it at this time. Be sure to
follow all instructions packed with the sink.
Connect the supply tubes to the faucet inlets and supply stops.
Left is hot, right is cold.
Tighten all connections.
4. Installation Checkout
Remove the aerator from the end of the spout by turning it
counterclockwise.
Turn on the main water supply.
Open the faucet handle to the ON position.
Flush hot then cold water through the faucet for about one
minute.
Push the faucet handle down to the OFF position.
Reattach the aerator by turning it clockwise.
Compression
Cold
Hot
Union
Aerator
Kohler Co. 5 1010460-2-B