Installation Guide

2. Install the Handspray
CAUTION: Risk of restricted water flow. Severe bends of the
faucet supply hoses may cause kinking. Restricted water flow
could result. To avoid kinking, carefully bend the faucet supply
hoses.
Apply a bead of plumbers putty or other sealant to the underside
of the spray escutcheon according to the manufacturer’s
instructions.
Insert the spray holder through the sink hole.
Hand tighten the nut to the spray holder from under the sink.
Remove any excess putty or sealant.
Carefully bend the faucet supply hoses to allow access for the
hose connection.
Insert the handspray hose through the spray holder.
Attach the hose to the hose outlet.
Handspray
Sink
Hose
Nut
Hose
Outlet
Supply
Hoses
Apply
plumbers
putty.
Handspray Holder
1010460-2-B 4 Kohler Co.