Installation Guide

3. Install Electrical Outlet – 120 V
WARNING: Risk of electric shock. Connect the power supply to a properly grounded,
grounding-type receptacle protected by a Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD). Do not remove the plug grounding pin. Do not use a grounding adapter.
Your bath with heated surface is equipped with a cord and plug. The power supply has been wired
at the factory. A qualified electrician must install a GFCI-protected, 120 V, 15 A, grounded outlet.
Locate the outlet behind the bath and within 24″ (610 mm) of the power supply.
For Wireless Music Kit: The kit requires installation of an electrical outlet within close proximity to
the amplifier location. Refer to the music kit installation instructions.
Plug the power cord into this outlet.
GFCI-Protected
Receptacle
Power Supply
User
Keypad
Heated
Surface
Junction Box
1196030-2-E 6 Kohler Co.