Specification Sheet

Lumbar
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Heated
Surface:
Technical Information
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
LeftDrain location:
50" x 24" (1270 mm x 610 mm)Basin area, bottom:
65" x 27" (1651 mm x 686 mm)Basin area, top:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
108 lbs (49 kg)Weight:
41 lbs/ft² (200.2 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
72 gal (272.5 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz, 300 W
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
W
Electrical component
rating:
2-1/8" (54 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 05:24
Mariposa
®
6' BubbleMassage
™
Bath
K-1257-GLW