Specification

(cont.) Optional Accessories
K-1705 Remote control ❑ NA
K-9498 3″ (76 mm) whirlpool keypad trim ❑ CP ❑ PB ❑ Other_____
1013469 Trim ring, interface, core ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
44-1/2″ (1130 mm) x 26-1/2″
(673 mm)
Basin area, top 60-1/4″ (1530 mm) x 30-1/4″
(768 mm)
Weight 111 lbs (50.3 kg)
To overflow:
Water depth 17-3/4″ (451 mm)
Capacity 102 gal (386 L)
* Approximate measurements for comparison only.
VHzA
Blower motor/Heated surface 220-240 50/60 5
Drop-in cutout 65″ (1651 mm) x 35″ (889 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 60
lbs/square foot (291 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
1-1/2"
Bath Drain
No change in measurements if connected with
drain illustrated. (K-7272)
16-3/4"
(425 mm)
22"
(559 mm)
Blower Motor/Control Access
34" (864 mm) W x 15" (381 mm) H Min
36" (914 mm)
1"
(25 mm)
3/4" (19 mm)
4-1/8"
(105 mm)
2-1/4"
(57 mm)
66" (1676 mm)
18"
(457 mm)
Lumbar
Angle 40˚
21"
(533 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5.5’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201701-4-
B