Installation Guide

2. Installation

CAUTION: Risk of product damage. The ampliﬁer is rated to

operate in temperatures up to 104°F (40°C). Do not install near heat

sources (such as radiators or heat registers) or in any location where

the temperature may exceed 104°F (40°C).

NOTICE: Mount the ampliﬁer in a dry location, and provide a

minimum of 6″ (152 mm) of space for proper air ﬂow.

NOTE: Choose the mounting location to best suit the location of the

incoming transducer wires and other cables.

NOTE: Make sure the status LED will be visible after installation.

Mounting Options

Wall-mount: Secure the ampliﬁer in an upright position using the

mounting brackets, anchors, and short screws provided.

Cabinet-mount: Secure the ampliﬁer in an upright position using

the mounting brackets and short screws provided.

Cabinet-Mount

Under-MountSurface-Mount

Wall-Mount

Kohler Co. 5 1298482-2-A