Dimensions Guide

3-1/2"

Notes

Required Electrical Service

Measure your actual product for rough-in details.

One circuit required, protected with Class A Ground-Fault

Circuit-Interrupter (GFCI) or Residual Current Device (RCD).

Install this product according to the installation

instructions.

120 V, 15 A, 60 HzHeated Surface:

The hot water supply should be 70% of the

capacity of the bath or greater. Installations will

vary.

Technical Information

All product dimensions are nominal.

Drop-inInstallation:

Kit is required for under-mount installations (sold

separately).

EndDrain location:

43" x 21-9/16" (1092 mm x 548 mm)Basin area, bottom:

53-1/2" x 32-1/8" (1359 mm x 816 mm)Basin area, top:

81 lbs (36.7 kg)Weight:

33 lbs/ft² (161.1 kg/m²)Minimum floor load:

15" (381 mm)Water depth:

57 gal (215.8 L)Water capacity:

Drop-in, 1042556-7, required, includedTemplate:

Heated Surface: 120 V, 0.5 A, 60 Hz, 65

Electrical component

rating:

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

1-31-2019 10:08 - US/CA

Sunward

5' Bath

K-1163-S1W