Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 51-3/8″ (1305 mm) x 21″ (533 mm)
Basin area, top 64-1/2″ (1638 mm) x 30-1/2″
(775 mm)
Weight 141 lbs (64 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (273 L)
* Approximate measurements for comparison only.
VHzA
1-speed pump 120 60 7
Heated surface 120 60 0.5
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/Control/Heated
surface
120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 43 lbs/square foot (210 kg/square meter) loading.
Locate a GFCI-protected 120 V, 15 A, grounded duplex
electrical outlet within 24″ (610 mm) of the bath junction box.
Will comply with ADA when installed per Section 607
Bathtubs of the ADA 2010 Standards for Accessible Design.
1/2" (13 mm) R.
1-1/2"
Bath Drain
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(32 mm)
Integral Flange
Detail
Lumbar
Angle 42˚
19"
(483 mm)
20-1/4"
(514 mm)
1-1/4"
(32 mm)
36" (914 mm)
72" (1829 mm)
3/4" (19 mm)
2-1/2"
(64 mm)
18"
(457 mm)
11-1/4"
(286 mm)
4-1/8"
(105 mm)
Product Diagram
ARCHER
®
ARCHER
®
6’ BATH WHIRLPOOL WITH INTEGRAL APRON AND BASKTM
Page2of2
1201658-4-
A