MSDS

SAE 5W-30 100% Synthetic Engine Oil
GM103159, GM103160, GM106161, GM103162, GM103163
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: chemical splash goggles.
Eye/face protection
Respiratory protection
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation.
Appropriate engineering
controls
Environmental exposure
controls
If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,
local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Individual protection measures
Hygiene measures
Skin protection
Other skin protection Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Liquid.
41°C (-41.8°F)
Not available.
Mild hydrocarbon.
Amber.
Not available.
Open cup: 222°C (431.6°F) [Cleveland.]
Not available.
Not available.
-
Appearance
Not available.
Physical state
Color
Odor
Odor threshold
pH
Melting point
Boiling point
Flash point
Evaporation rate
Flammability (solid, gas)
Lower and upper explosive
(flammable) limits
Vapor pressure
Not available.
Not available.
Section 9. Physical and chemical properties
6/12
Date of issue : 03/15/2017