Dimensions Guide

Features

•

Brass construction.

•

2.2 gal/min (8.3 l/min) maximum flow rate.

•

Dual control wall-mounted.

•

Ceramic disc valves.

Codes/Standards

ASME A112.18.1/CSA B125.1

NSF/ANSI 61

NSF/ANSI 372

All applicable US Federal and State material

regulations

DOE - Energy Policy Act 1992

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-16-2018 02:46

Falling Water

Wall-mount Valve

K-410-K

PAGE 1
Falling Water® Wall-mount Valve K-410-K Features • • • • Brass construction. 2.2 gal/min (8.3 l/min) maximum flow rate. Dual control wall-mounted. Ceramic disc valves. Codes/Standards ASME A112.18.1/CSA B125.1 NSF/ANSI 61 NSF/ANSI 372 All applicable US Federal and State material regulations DOE - Energy Policy Act 1992 KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co.
PAGE 2
Falling Water® Wall-mount Valve K-410-K 4" (102 mm) Technical Information All product dimensions are nominal. Faucet: Flow rate: 2.2 gal/min (8.3 l/min) Notes Install this product according to the installation guide. Three 1-5/8" (4.1 cm) diameter cutout holes are required for the spout and handles. Follow the installation dimensions precisely as there is no deep roughing-in kit available for this product. WARNING: Risk of property damage.