Installation Guide

1. Assemble the Bath Filler - All

NOTE: The arms included with the bath ﬁller are NOT identical.

The screw hole on each arm should face toward the bath ﬁller body.

Determine the left and right-side arms. The setscrew hole for each

arm should face the bath ﬁller body.

Apply lubricant (provided) to the O-rings on the bath ﬁller body.

Insert the short side of the arms into the bath ﬁller body.

Secure each arm to the bath ﬁller body with a large setscrew.

Orient the handshower bracket with the large side of the taper

facing up.

NOTE: The handshower bracket should be assembled perpendicular

to the arm to ensure the handshower hangs over the bath.

Slide the handshower bracket onto the arm for the hot water

supply, then secure with the small setscrews at the desired height

on the arm.

Arm

Large Setscrew

Small Setscrew

Handshower Bracket (large side up)

Bath Filler Body

Kohler Co. 5 1054455-2-E