Installation Guide

Prepare the Site (cont.)

Construct stud framing or a pocket for the control ampliﬁer.

Provide a means to route the user interface cable through the wall to the control ampliﬁer.

Plumbing

NOTE: For through-the-ﬂoor drain installation: cut a hole in the subﬂoor to accommodate the drain

connections.

Install the rough drain and water supply plumbing.

Cap the supplies and check for leaks.

Attach the drain to the bath according to the instructions packed with the drain. Do not connect the

trap at this time.

1297608-2-B 8 Kohler Co.