Dimensions Guide

Technical Information
Fixture*:
Basin area:
Bathing well 52” (1321 mm) x 38-3/4” (984 mm)
Top area 61” (1549 mm) x 46-1/4” (1175 mm)
Weight 151 lbs (68.5 kg)
To overflow:
Water depth 15” (381 mm)
Capacity 96 gal (363.6 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlet onto the wooden stud provided as
illustrated below.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (192 kg/square meter) loading.
Ø 1-1/2" OD
3" (76 mm)
Recommended faucet area
63"
(1600 mm)
Pump/Control Access
13-1/8"
(333 mm)
4-7/8"
(124 mm)
43-3/4"
(1111 mm)
1/2" (13 mm)
2-7/8"
(73 mm)
2-7/8" (73 mm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
1-1/4"
(32 mm)
Tile Flange
Detail
Wooden Stud
(Provided)
60" (1524 mm)
35"
(889 mm)
60"
(1524 mm)
35"
(889 mm)
29"
(737 mm)
19-1/2"
(495 mm)
21"
(533 mm)
29"
(737 mm)
Product Diagram
TERCET
®
TERCET
®
BATH WHIRLPOOL WITH INTEGRAL APRON AND TILE FLANGE
Page2of2
1041919-4-
E