User Manual

6. REMOTE CONTROL OVERVIEW

You will need to pair the remote control with the projector before using it. Follow these instructions to

pair the 2.4G wireless remote with your projector.

1. Within two (2) minutes of turning on the projector, press and hold both the Vol + and Vol – keys for

approximately three (3) seconds.

2. The indicator light in the remote will lash quickly during this time and then stop. When the

lashing stops, this indicates that the remote has successfully paired with the projector.

NOTE: While the mouse button is activated, the Volume + or Volume - keys will function as page up

and down.