KODAK LUMA 450 PORTABLE FULL HD SMART PROJECTOR User Manual 5"H | 5"W | 1.3"D (12.8 cm | 12.8 cm | 3.4 cm) Please read all directions before using the product and retain this guide for reference.
CONTENTS 1 INTRODUCTION 3 2 SPECIFICATIONS 3 3 BOX CONTENTS 3 4 SAFETY PRECAUTIONS 5 PRODUCT OVERVIEW 4 6 REMOTE CONTROL OVERVIEW 5 7 USING YOUR PHONE 8 USING A MOUSE 9 CHARGING THE PROJECTOR 10 USING THE PROJECTOR TO CHARGE DEVICES 3-4 6 7 7 8 11 USING THE AUDIO OUT JACK 12 POWERING THE PROJECTOR ON/OFF 13 PHOTO PLAYBACK CONTROLS 14 VIDEO PLAYBACK CONTROLS 15 ADJUSTING FOCUS 16 ADJUSTING VOLUME 17 CONNECTING TO WIRELESS NETWORKS 18 CONNECTING A BLUETOOTH DEVICE 19
1. INTRODUCTION Thank you for purchasing the KODAK LUMA 450 PORTABLE FULL HD SMART PROJECTOR. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
• Do not place, drop, or submerge the projector in water or any other liquid. • If the projector somehow falls into water despite you taking all of the above precautions, please do not reach into the water to retrieve it. Unplug it immediately and then retrieve it. • Take care that objects do not fall and liquids are not spilled onto the projector. 5. PRODUCT OVERVIEW 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
6. REMOTE CONTROL OVERVIEW You will need to pair the remote control with the projector before using it. Follow these instructions to pair the 2.4G wireless remote with your projector. 1. Within two (2) minutes of turning on the projector, press and hold both the Vol + and Vol – keys for approximately three (3) seconds. 2. The indicator light in the remote will flash quickly during this time and then stop. When the flashing stops, this indicates that the remote has successfully paired with the projector.
7. USING YOUR PHONE For greater ease of use and a more intuitive experience, you can control the projector with the KODAK LUMA Companion App from the Apple App Store® or the Google Play™. Once installed, you can use your phone as a remote to navigate through menus, mirror your screen, easily input login information for apps, and control media volume. Make sure to try out the reverse screen mirroring feature, which allows you to view the LUMA interface directly on your phone, and navigate that way! 1.
8. USING A MOUSE If you’d rather use a mouse instead of the provided remote control, this projector supports USB and wireless mice, as well as USB and wireless keyboards. 1. Left: Confirm 2. Right: Return 3. Wheel: Page up/down 9. CHARGING THE PROJECTOR Before using the projector, connect it to the charger and allow it to fully charge. Always use the original charger that was provided to ensure proper charging.
10. USING THE PROJECTOR TO CHARGE DEVICES 11. USING THE AUDIO OUT JACK While the projector does include two (2) built-in speakers for regular use, you can also connect either headphones or a portable speaker to the 3.5 mm AUDIO OUT jack as shown in the below image. NOTE: External speakers can also be connected to the projector via Bluetooth. 12. POWERING THE PROJECTOR ON/OFF To turn the projector on or off, hold the power button on the side for three (3) seconds.
13. PHOTO PLAYBACK CONTROLS To access your photos, from the home screen, navigate to Source > File Browser. From there you can view individual photos or a slideshow of all photos stored either on your removable storage, or on the projector itself (if you’ve downloaded anything). In slideshow mode, each photo will automatically display in the order they are stored. To access the controls during playback, you will first need to tap the center circle button on top of the projector to bring up the control menu.
16. ADJUSTING VOLUME To adjust the device volume during playback, use the + and - buttons on the remote control. 17. CONNECTING TO WIRELESS NETWORKS 1. From the home screen, select Settings. 2. From the Settings menu, select Wi-Fi. 3. Select the correct network from the list and use the arrows on top of the projector, your phone, or the remote to navigate the keyboard and enter the password. 4. The projector should connect to that network whenever it is in range.
19. ADJUSTING BRIGHTNESS If you’d like to adjust the brightness of your projector to conserve electricity and energy usage, follow these steps: 1. From the home screen, select Settings. 2. From the Settings menu, select Brightness. 3. Choose between three settings of brightness: low, medium, and high. 20. SET THE SCREEN ORIENTATION Depending on the placement of your projector, you can adjust the rotation and orientation of the screen display accordingly. 1. From the home screen, select Settings.
2. From the Settings menu, select Projector Mode. 3. Select the image that most closely resembles the positioning of your projector and it will adjust the display accordingly. 21. ADJUSTING ZOOM 1. From the home screen, select Settings. 2. From the Settings menu, select Zoom. 3. Select the desired zoom setting for your screen. NOTE: Screen can be zoomed out up to 50%. 22. ADJUSTING KEYSTONE 1. From the home screen, select Settings. 2. From the Settings menu, select Keystone. 3.
To adjust keystone manually: 1. Select the Advanced option. 2. Adjust the four sides correction. 3. Back out of the page to save your changed settings. 23. SETTING DATE AND TIME Your projector should automatically update to the correct date and time once you connect to a wireless network. If you need to manually adjust the date and time, follow these instructions: 1. From the home screen, select Settings. 2. Scroll down to select Date and Time. 3.
25. CONNECTING EXTERNAL DEVICES A. USB Drives To access photos or videos stored on any USB drive, simply insert the drive into the corresponding port on the side. The projector will read the files directly from the drive. You can access them from the home screen by selecting Source > File Browser. B.
26. SCREEN MIRRORING (ANDROID/WINDOWS - MIRACAST®) 1. From the projector home screen, select “Source,” select “Screen Mirroring,” and then select “Miracast®”. The name of the projector will be displayed on the screen so that you can accurately identify it when attempting to connect. 2. Make sure your device is connected to the same network as your projector. 3. Activate the screen mirroring software on your device. a. To activate screen mirroring on your Android™ device: i.
3. Activate the screen mirroring software on your device. a. To activate screen mirroring on your iOS device: i. Swipe down to reveal the Control Center and tap the “Screen Mirroring” button. 4. Select the projector from the list of devices and select “Connect.” A dialog box will pop up on the projector screen for you to confirm the connection; use the arrows or the remote to highlight “Accept” and press the confirm button. 5. Your screen will now be mirrored to the projector. 6.
30. UPDATING YOUR SOFTWARE 1. From the home screen, select Settings. 2. From the Settings menu, select Update. 3. The system will then check for a software update and download it if necessary. NOTE: You need to be connected to a wireless network to download a software update. 4. When the software update finishes, your projector will restart. You shouldn’t lose any data in the process. 31.
Warranty period(s), MUST be presented to the Company or its authorized service provider in order to obtain the requested service. Service options, parts availability, and response times may vary and may change at any time. In accordance with applicable law, the Company may require that you furnish additional documents and/or comply with registration requirements before receiving warranty service. Please contact our customer service for details on obtaining warranty service: USA: kodak@camarketing.
NOTWITHSTANDING ANYTHING TO THE CONTRARY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE COMPANY PROVIDES THE PRODUCT “AS-IS” AND “AS-AVAILABLE” FOR YOUR CONVENIENCE AND THE COMPANY AND ITS LICENSORS AND SUPPLIERS EXPRESSLY DISCLAIM ALL WARRANTIES AND CONDITIONS, WHETHER EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET ENJOYMENT, ACCURACY, AND NON-INFRINGEMENT OF THIRD-PARTY RIGHTS.
www.kodakphotoplus.com The Kodak trademark, logo, and trade dress are used under license from Eastman Kodak Company. Android is a trademark of Google, LLC. Bluetooth is a trademark of Bluetooth SIG, Inc. USA. DLP® and the DLP logo are registered trademarks of Texas Instruments. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries. Lightning, Mac, and AirPlay are trademarks of Apple Inc.
