User Manual
SETTING UP YOUR CAMERA Setting Up Your Camera For the First Time 1. From your smartphone, download the iSecurity+ app from the Apple App Store or the Google Play store. 2. Twist off the base plate of your KODAK Video Monitor. Connect your Camera to the supplied AC power adaptor and plug the cord into an electrical outlet. Twist the base plate back on. 3. Wait up to 2 minutes for the front LED to flash red and orange. 4. Enable Wi-Fi on your smartphone, as well as your home Wi-Fi network. 5.
CONFIGURING YOUR CAMERA You can configure your camera to fit your needs. Accessing From Your Mobile Device Launch the iSecurity+ app and click the Gear Icon next to your Camera’s name. Accessing From Your Computer Go to https://app.isecurityplus.com. Click on “Settings” underneath your Camera’s name. Camera Name Change the name of your Camera. Time Zone Change the time zone of your Camera. This will change the date format of your motion-triggered recordings.
Sharing Your Camera 1. Once your family or friend has accepted your invitation, his/her name should appear under “Family and Friends”. 2. Under “Status”, select “Viewable by Friends”. 3. Under “Family and Friends”, check the box next to the person you are sharing your camera to. Sharing From Your Computer Go to https://app.isecurityplus.com. Click on “Sharing” underneath your Camera’s name. Sending an Invitation 1.
ENABLING 1-DAY CLOUD STORAGE Your KODAK CFH-V15 comes with free lifetime 1-day cloud storage of motiontriggered events. Enabling Recording From Your Mobile Device 1. Launch the iSecurity+ app and click the Gear Icon next to your Camera’s name. 2. Turn on “Event Recording” under “Motion Detection”. Viewing Recordings From Your Mobile Device 1. Launch the iSecurity+ app and click on the “Events” tab on the bottom task bar. 2. Click on your Camera’s name. 3. Click on the event you would like to view.
LED INDICATORS Green Connected to iSecurity+ servers. Orange Home network connection issue. Please check your home router or modem. Flashing Orange Not connected to the internet. If you have not set up your camera, please follow the setup instructions in this manual. If your Camera was operating normally, please check your outgoing internet connection. For troubleshooting help, visit our FAQ section at https://kodakconnectedfamilyhome.zendesk.com or contact us directly at support@isecurityplus.com.
