Owners Manual

Duct Cover Installation

Figure 10

Figure 11

Figure 12

8. Mark the position of the Duct Cover-Mounting

Bracket {M}. Use reference E from Table 2 and

measurements on Page 16-17. Attach and

secure Duct Cover-Mounting Bracket {M} with

two screws (provided). (Figure 10) NOTE: Inner

duct cover will cover the duct cover-mounting

bracket.

9. Position the entire duct cover up onto the hood.

10. Secure the inner duct cover with two (3/16” x

3/8”) screws {J} to the duct cover-mounting

bracket. Shown in Figure 11.

11. Fasten outer duct cover to Duct Cover Support

{L} with four (4 x 6mm) screws {J}.

Install Accessories

12. Place baffle filters and spacers underneath the

hood (Figure 12).

Final Installation

13. Turn power ON in control panel. Check all lights

and fan operation.

14. Make sure to leave this manual for the

homeowner.

Attach Together