Product Manual

2 OF 7
Thank you very much for choosing a Klutch™ product! For future reference, please complete the owner’s
record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this machine is not modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted the distributor to determine if it can
or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This Low Noise 3/8in. 90° Angle Air Drill provides effortless power and enough speed to complete a
variety of drilling applications. Its right-angle head is ideal for use in tight quarters, providing better
efficiency and productivity. Reduced noise level and lightweight construction allow you to work longer
with less fatigue.
TECHNICAL SPECIFICATIONS
Item
Description
Noise Level
81dB
Speed
1,800 RPM Free Speed
Air Consumption
3 CFM
Inlet Size
1/4in.
Hose Size
3/8in.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood by the
operator that common sense and caution are factors, which cannot be built into this product, but must be
supplied by the operator.