SW-110, SW-112 and SW-115 Subwoofers Owner's Manual
IMPORTANT SAFETY INSTRUCTIONS! POSITIONING YOUR SW SUBWOOFER 1. 2. 3. 4. 5. 6. 7. 8. Klipsch® powered subwoofers are designed to reproduce deep bass and deliver the impact that makes your movies and music come alive. Typically, optimum performance will result if you place your subwoofer in a corner of the room on the same wall as your front channel speakers (Refer to Figure 1). Please note that room placement can have a dramatic effect upon the performance of your powered subwoofer.
system is completely hooked up. If your receiver does not have a crossover point setting, set the Lowpass Filter on the subwoofer instead within the same recommended settings (see receiver manual for additional speaker setup info). “PHASE” 0/180 - This control is used to acoustically match the subwoofer’s output to your main speakers. Select the position, either 0° or 180°, in which your subwoofer has more output at the listening position.
Figure 1 Speaker Placement in Listening Area Figure 2 SW-110, SW-112 and SW-115 Subwoofer Hook Up Your Klipsch SW subwoofer is equipped with both Speaker (High) Level and Line In (Low) Level hookups. The connection you use depends on what type of receiver (or pre-amplifier) you are hooking the subwoofer to. Do not hook up both connections together as damage to your system may be a result! Most connections will use the Line In Connection.
3502 Woodview Trace Indianapolis, IN 46268 +,)03#( s KLIPSCH COM © 2011 Klipsch Speakers
