SURROUND BEACON SPEAKER MANUAL
WELCOME! UNPACKING Thank you for purchasing one of the best sounding speakers ever produced. At KLH, we have been making high-quality components since 1957, and we take pride in making your music and movies the best experience possible. The package should be placed on the floor or table top with the box flaps up. Cut the tape with a utility knife to open the package.
CONNECTING YOUR BEACON SURROUNDS MOUNTING The Beacon surround speakers have quality nickel-plated binding posts that will accommodate stripped wire, spade connectors or banana plugs. Be sure to use quality speaker cables, up to 12 gauge (AWG). The lowest gauge possible is recommended. Before using banana plugs, be sure to remove the black and red inserts on the binding posts. The Beacon surround speakers can be placed behind or to either side of the main listening area.
SPECIFICATIONS Beacon Surround Speaker Frequency response Sensitivity Power handling Components Finishes Impedance Crossover point Dimensions: Weight: 50Hz-23kHz. 91dB. 150 watts. 2 x 5.25” Woven Kevlar mid/bass drivers, and 2 high performance 1” Anodized Aluminum tweeters Black Oak Vinyl 81 2kHz. 11.25” x 11.5” x 6.375” (H x W x D) 11.25 lbs. 984 Logan Street, Suite 301 Noblesville, IN 46060 klhaudio.