Buying Guide

Cat. No.
650 only
Cushion-Grip Scratch Awl
•
Professional, heavy-duty, hard-pointed awl
•
Scribes metal, starts screw holes, performs a variety of piercing and punching jobs
•
Rigid, chrome-plated, heat-treated, tempered-steel shank has full reinforcing bolster
at handle for extra strength and impact reinforcement
•
Cat. No. 650DD has plated metal strike cap to protect handle from hammer blows
and is engineered, manufactured and tested for prying, chiseling and punching
650DD
Cat. No. Shank Length Overall Length Weight
650 3-1/2" (88.9 mm) 7-7/8" (200.0 mm) 0.25 lb (0.11 kg)
650DD 3-1/2" (88.9 mm) 7-7/8" (200.0 mm) 0.30 lb (0.14 kg)
Steel Scratch Awl
•
One-piece forged-steel blade and bolstered shank
•
Heat-treated for long life
•
Well-balanced for maximum efficiency during use
•
Black finish for rust resistance
66385
Cat. No. Overall Length Shank Length Weight
66385 7" (177.8 mm) 3-1/2" (88.9 mm) 0.30 lb (0.14 kg)
Conduit-Fitting and Reaming Screwdriver
•
Hooded-blade design keeps tip from slipping out of screws, especially when
tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use
•
Reams both the inside and outside of the conduit at the same time
•
5/16" (8 mm) screwdriver tip with 2-1/2" (64 mm) long shank
•
Longer Cushion-Grip handle provides comfort and more torque for reaming
•
Replaceable reaming blade is now held in place with a 1/6" (1.5 mm) set screw
85191
19353
CONDUIT REAMER
REPLACEMENT BLADE, 2pk
Conduit Reamer
•
Locks onto screwdrivers; reams and smooths thin-wall conduit
•
Reams ID and OD at the same time
•
Two set-screws for round- and square-shank screwdrivers
•
Fits up to 3/8" (10 mm) keystone-tip screwdrivers
•
NOT for use on power tools
19352
Power Conduit Reamer
•
Ream conduit and install fittings in a fraction of the time
•
Designed to fit into power drill chucks and quick release adapters; impact ready
•
Includes precision engineered replaceable reaming blade
•
Replacement blades are available and the only approved blade for use in this tool
•
Replacement bits are available but any standard 1/4" hex bit will work
85091
NOTE: Read and follow safety instructions in power tool owner’s manual.
IMPACT RATED!
19353
CONDUIT REAMER
REPLACEMENT BLADE, 2pk
19353
CONDUIT REAMER
REPLACEMENT BLADE, 2pk
4x
Stronger
Bit Retention
1/4" hex
quick connect
Precision engineered
replaceable reaming blade
Cat. No. Conduit Size Overall Length Weight
85191 1/2" (12.7 mm), 3/4" (19.1 mm), 1" (25.4 mm) 7-1/2" (190.5 mm) 0.50 lb (0.23 kg)
Cat. No. Conduit Size Overall Length Weight
85091 1/2" (12.7 mm), 3/4" (19.1 mm), 1" (25.4 mm) 5-3/4" (146.1 mm) 0.33 lb (0.15 kg)
Cat. No. Conduit Size Overall Length Weight
19352 1/2" (12.7 mm), 3/4" (19.1 mm), 1" (25.4 mm) 6-3/4" (171.5 mm) 0.20 lb (0.09 kg)
Conduit Reamers
Scratch Awls
Screwdrivers, Nut Drivers and Accessories
See page 295 for additional information on warnings.
71
www.kleintools.com