Appliances Drawer Dishwasher Installation Instructions

5. Reinstall electric box cover with all wires contained inside the

terminal box.

Install Trim Pieces and Level Dishwasher

1. Open bottom drawer.

2. Push in clips and slide rails back 5" (12.7 cm).

3. Lift drawer off slide rails. Place drawer off to the left on

covering. Slide rails into dishwasher.

4. Slide the dishwasher into position in the cabinet opening.

Check to ensure that the drain hose and electrical wiring are

not kinked.

5. Check left to right level by placing the level on the top of the

drawer. Check front to back level by placing level on the slide

rails.

6. Adjust legs with a ³⁄₁₆" socket wrench to level the dishwasher.

7. Rest trim strip on floor and mark trim at the top of the frame

flange height. Pick the closest groove to the mark. If the mark

is between two grooves, choose the groove that makes the

trim strip the shortest. On a covered surface, cut the trim strip

at the selected groove. Pull dishwasher back out of cabinet

opening about 6" (15.24 cm).

A. Adjust legs.