Installation guide

9. Install the two #8-18 x 1-3/8" screws from the literature

package in the top corners, as shown. Align top edges of

full front panel and console; tighten corner screws.

2 screws

°l

top

edges

1-3/8"screw

10. Tighten the two side screws reinstalled in Step 8.

11. Reinstall and tighten the three remaining side screws.

Custom panel dimensions

IMPORTANT:You need to know what control panel is on

your dishwasher before you order your custom door panel.

For dishwashers with the control panel shown below:

models KUDP02FSPA, KUDS02FSPA, KUDU02FSPA)

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

_ ,, , - ,, ,23 1/2 (597 cm) _30 3/16 (767 cm)

3/4" (19.1 mm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe

kick, adjust the height of the wood panel accordingly. Not recommended for

toe kicks greater than 6" (15.2 cm).

Follow directions under Option #1 of "install custom panel"

section.

For dishwashers with the control panel shown below:

(Models KUDIO2FR, KUDPO2FR, KUDSO2FR, KUDUO2FR)

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

23-3/8" (59.4 cm) '30" (76.2 cm)

_ 3/4" (19.1 ram)

_This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe

kick, adjust the height of the wood panel accordingly. Not recommended for

toe kicks greater than 6" (15.2 cm).

Follow directions in Option #2 of "Install custom panel"

section.

For dishwashers with the control panel shown below:

(Models KUDC021R, KUDI021R, KUDP021R, KUDS021R)

...... .e i!il

(Your model may vary slightly from picture above.)

Custom door panel dimensions are:

1/8" (3.2 mm)

_This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe

kick, adjust the height of the wood panel accordingly. Not recommended for

toe kicks greater than 6" (15.2 cm).

Follow directions in Option #3 of "Install custom panel"

section.