Control Guide
Table Of Contents
- Feature Guide_W11297617
- Electronic Oven Controls_W11297617
- AquaLift Self-Cleaning Tech_GFSR_CG
- Surface Temperatures_GFSR_CG
- Surface Burners_W11297617
- Surface Grates_W11297617
- Griddle_W11297617
- Cookware_W11281987
- Home Canning_GFSR_CG
- Oven Use_Ranges/Ovens_CG
- Racks and Bakeware_W11297617
- Roll Out Rack_W11297617
- Sabbath Mode_W11297617
- Baking and Roasting_W11297617
- Broiling_W11297617
- Convection Cooking_W11297617
- Proofing Bread_W11297617
- Cook Time_W11297617
- Baking Drawer_EFSR/GFSR
- Feature Guide_W11297617_FR
- Electronic Oven Controls_W11297617_FR
- AquaLift Self-Cleaning Tech_GFSR_CG_FR
- Surface Temperatures_GFSR_CG_FR
- Surface Burners_W11297617_FR
- Surface Grates_W11297617_FR
- Griddle_W11297617_FR
- Cookware_W11281987_FR
- Home Canning_GFSR_CG_FR
- Oven Use_Ranges/Ovens_CG_FR
- Racks and Bakeware_W11297617_FR
- Roll Out Rack_W11297617_FR
- Sabbath Mode_W11297617_FR
- Baking and Roasting_W11297617_FR
- Broiling_W11297617_FR
- Convection Cooking_W11297617_FR
- Proofing Bread_W11297617_FR
- Cook Time_W11297617_FR
- Baking Drawer_EFSR/GFSR_FR
8
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or coils. Aluminum and
copper may be used as a core or base in cookware. However,
when used as a base they can leave permanent marks on the
surfaces.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
Check for flatness by placing the straight edge of a ruler across
the bottom of the cookware. While you rotate the ruler, no space
or light should be visible between it and the cookware.
Use the following chart as a guide for cookware material
characteristics.
Cookware Characteristics
Aluminum
■ Heats quickly and evenly.
■ Suitable for all types of cooking.
■ Medium or heavy thickness is best for
most cooking tasks.
■ May leave aluminum residues, which may
be diminished if cleaned immediately after
cooking.
Cast iron
■ Heats slowly and evenly.
■ Good for browning and frying.
■ Maintains heat for slow cooking.
■ Rough edges or burrs may scratch the
cooktop.
Ceramic or
Ceramic glass
■ Follow manufacturer’s instructions.
■ Heats slowly, but unevenly.
■ Ideal results on low to medium heat
settings.
■ May scratch the cooktop.
Copper
■ Heats very quickly and evenly.
■ May leave copper residues, which may be
diminished if cleaned immediately after
cooking.
■ Can leave a permanent stain or bond to
the cooktop if overheated.
Earthenware
■ Follow manufacturer’s instructions.
■ Use on low heat settings.
■ May scratch the cooktop.
Cookware Characteristics
Porcelain
enamel-on-
steel or cast
iron
■ See stainless steel or cast iron.
■ Porcelain enamel bakeware without the
metal base may bond to the cooktop if
overheated.
Stainless steel
■ Heats quickly, but unevenly.
■ A core or base of aluminum or copper on
stainless steel provides even heating.
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as the
cooking area outlined on the cooktop. Cookware should not
extend more than 1/2" (1.3 cm) outside the area.
Home Canning
When canning for long periods, alternate the use of surface
burners between batches. This allows time for the most recently
used areas to cool.
■ Center the canner on the grate above the burner.
■ Do not place canner on 2 surface burners at the same time.
■ For more information, contact your local agricultural extension
office or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.