Manual

Attachments and Accessories
General Information
KitchenAid _'Attachments are designed to assure long life. The attachment
power shaft and hub socket are of a square design, to eliminate any
possibility of slipping during the transmission of power to the attachment.
The hub and shaft housing are tapered to assure a snug fit, even after
prolonged use and wear. KitchenAid _ Attachments require no extra power
unit to operate them; the power unit is built-in.
See the Use and Care Guide that came with your stand mixer attachments
for speed settings and operating time.
Hinged
Hub Cover
Attachment
Hub Socket
SNot part of mixer.
General
Attachment
Knob Attachment
Power Shafts
Attachment
..... H o LIs in g
Notch Pin
Attachn _ent Shaft
Housing
Instructions
To Attach
1. Turn stand mixer off and
unplug.
2. Loosen attachment knob by
turning it counterclockwise.
3. Flip up hinged hub cover.
4. Insert attachment shaft housing
into attachment hub, making
certain that attachment power
shaft fits into square attachment
hub socket. It may be necessary
to rotate attachment back and
forth. When attachment is in
proper position, the pin on the
attachment will fit into the
notch on the hub rim.
5. Tighten attachment knob by
turning clockwise until
attachment is completely
secured to stand mixer.
16
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
6. Plug into a grounded 3 prong
outlet.