Instruction for Use

22
Instruction for oven use
AUTOMATIC OVEN CLEANING
For a description of this function, see the chapter CLEANING and the functions table on page 7.
PYRO
COOL
To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:
1. Turn the “Functions” knob to PYRO.
2. Press button
to confirm your choice and start the pyro-cleaning cycle.
To select ECO pyro-cleaning, turn the “Browse” knob: the word ECO appears at the bottom right of the
display. Press button
to start the shorter program.
During pyro-cleaning, the oven door is automatically locked and the symbol
appears on the display.
The door remains locked at the end of the cleaning cycle: “COOL” appears on the display, indicating the
oven is still cooling down. When the oven cools to a safe temperature, the symbol
switches off and
the display shows “END”.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
and at the same time for at least 3 seconds. When activated, the functions
associated with the buttons are locked and the display shows a key symbol. This function can also be
activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function
is activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the
previously selected function will have to be set again.