- KITCHENAID Gas Freestanding and Slide-In Ranges Use and Care Guide

45
Using and Caring for Your Oven
Using and replacing the oven light(s)
Your oven may have a standard oven light
or two side halogen lights. The oven light(s)
will come on when you open the oven door.
To turn the light(s) on when the oven door is
closed, press the Oven Light pad
OVEN
LIGHT
on
the control panel. Press the pad
OVEN
LIGHT
again
to turn off the light(s).
Replacing the oven light
(models with light on back wall):
1. Unplug range or disconnect power.
2. Make sure the oven is cool before
replacing the light bulb.
3. Remove the glass bulb cover in the back
of the oven by turning it counterclockwise.
4. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
5. Replace the bulb cover by turning it
clockwise.
6. Plug in range or reconnect power.
NOTE: The oven light will not work during
the Self-Cleaning cycle.
Replacing oven lights
(models with side halogen lights):
1. Unplug range or disconnect power.
2. Make sure the oven is cool before
replacing the light bulb.
3. Remove glass light cover by grasping
front edge of cover and pulling it away
from the side wall of the oven.
4. Remove the light bulb from its socket.
Replace the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
5. Replace the light cover by snapping
it back into wall.
6. Plug in range or reconnect power.
NOTE: The oven lights will not work during
the Self-Cleaning cycle.