Owner's Manual

12
USING YOUR FOOD PROCESSORUSING YOUR FOOD PROCESSOR
Before rst use
Before using your Food Processor
for the first time, wash the bowls
and accessories as described in the
“Care and Cleaning” section.
Attaching the work bowl
Power
shaft
3
Turn work bowl to lock it on the base.
2
Place the work bowl on the base
as shown.
1
Be sure the Food Processor is turned off,
unplugged, and placed on a level surface.
Attaching the lid and safety lock
1
Install the work bowl lid, aligning
the tabs and locking it into place. The
Ultratight seal is spill resistant.
2
The large feed tube must be inserted
into the lid for the Food Processor to
run.
TIP: It is easier to attach the lid when the large feed tube is removed. After attaching the
lid, make sure to insert the large feed tube.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
WARNING
W10545030B_ENv3.indd 12 1/25/13 10:52 AM