Use and Care Manual

CMD + SHIFT CLICK TO CHANGE COPY
10
ASSEMBLING THE FOOD PROCESSOR
Attaching the work bowl cover
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
1
Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
2
Fit the food pusher into the 3-in-1
feed tube. See “Using the 3-in-1 feed
tube” for details on working with
different sized foods.
Installing the adjustable slicing disc
1
Hold the slicing disc by the finger grips
and lower it onto the drive adapter.
2
Install the work bowl cover, being sure
it locks into place.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
Adjusting the slicing thickness
Set the desired slicing thickness by moving
the lever to the left for thinner slices or to the
right for thicker slices.
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
Thicker
Thinner
W10679565A_v1.indd 10 4/18/14 2:11 PM