Manualshelf

Owner's Manual

ManualsBrandsKitchenAid ManualsAppliancesKitchenAid - 6.3 Cu. Ft. Slide-In Double Oven Gas True Convection Range with Self-Cleaning and Griddle - Passion Red
11121314151617181920
15
USING YOUR OVEN
FUNCTION USE AND LIGHT BEHAVIOR
Validity Check Delay The unit goes through a validity check to verify that the selected Mode and Temperature
combination is valid.
If a valid combination has been selected, the Mode/Temperature Knob indicator lights will show
white and the Start button will begin to pulse prompting for action.
If an invalid combination has been selected, the knob indicator lights will blink to show that the
selected Mode and Temperature combination is invalid.
Refer to "Knob Combinations" section for more information.
If the Start Button is pressed too quickly in the validity check, the Start Button indicator light will
display an invalid quick blink.
Invalid Temperature
Selection Made During A
Cycle
If the Temperature Knob is changed during a cycle to a selection that is invalid and the unit was in a
previous cycle, the unit will remain in the previous cycle until corrected.
The knob indicator lights will blink to show an invalid selection has been made and will continue to
light until corrected.
Mode is in bake, temperature is at 350ºF (177ºC), the Start button is pressed and cycle is running.
Then temperature is moved to clean. Unit will continue to bake at 350ºF (177ºC).
Changing Mode Selections
During A Cycle
If the Mode or Temperature Knob is changed during a cycle to a selection that is valid, the Start
button will blink to indicate prompt for action. Press the Start Button to begin new setting selection.
If the Mode/Temperature Knob is moved from Bake to Convect Bake, the Start button will blink as a
prompt for action.
A tone will sound when:
■ The unit is powered on
■ The unit switches to Off mode
■ A valid Mode and Temperature selection has been made and
the Start button is pressed to begin a cycle
■ An invalid Start button selection is made
■ There is an error with the unit
■ Preheating has been completed
■ The timer from the app has ended (the tone will sound every
ve minutes until the timer is stopped)
■ A Wi-Fi event is occurring
■ The Meat probe connects/disconnects