Installation guide

5. Tightenscrewsjustenoughtoholdbracketsinplacewhen
cooktopisputincutout.
6. Turnthecooktoprightsideupandplaceincutout.
NOTE:Makesurethatthefrontedgeofthecooktopisparallel
tothefrontedgeofthecountertop.Ifrepositioningisneeded,
liftentirecooktopupfromcutouttopreventscratchingthe
countertop.
7. Loosenthescrewsandrotatethebracketssothattheyare
perpendiculartotheedgeoftheburnerboxandextend
beyonditsedge.Securelytightenscrews.
Installing Brackets After Placing Cooktop in Cutout
1. Place cooktop in cutout.
NOTE: Make sure that the front edge of the cooktop is parallel
to the front edge of the countertop. If repositioning is needed,
lift entire cooktop up from cutout to prevent scratching the
countertop.
2. Remove the attachment screws for the selected bracket
locations from the bottom of the burner box.
Select bracket mounting holes that will allow the bracket to
extend far enough out from the cooktop for the installation of
21/2'' (6.4 cm) clamping screws.
F
A
E
__ D
............... C
A. Glass cooktop
B. Burner box
C.Attachment screw
D. Clamp bracket (extends far enough beyond
burner box to allow installation of clamping
screws)
E. 2Y2" (6.4 cm) clamping screw (to be installed in
"Attach Cooktop to Countertop")
F. Countertop
Attach brackets to burner box bottom with bracket
attachment screws using the bracket mounting holes selected
in Step 3. Securely tighten screws.