Setup and user guide

9
UPPER RACK
Load delicate and light dishes:-
glasses, cups, saucers, low salad
bowls.
The upper rack has tip-up
supports which can be used in a
vertical position when arranging
tea/ dessert saucers or in a lower
position to load bowls and food
containers.
(loading example for the upper rack)
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be positioned at three
dierent heights to optimize the arrangement of
crockery inside the rack.
Wine glasses can be placed safely in the foldable
aps by inserting the stem of each glass into the
corresponding slots.
For optimum drying results incline the foldable aps
more. To change the inclination, pull up the foldable
ap, slide it slightly and position it as you wish.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the
most of the tip-up supports by creating more
space upwards and avoid collision with the
items loaded into lower rack.
The upper rack is equipped with a Upper
Rack height adjuster (see gure), without
pressing the levers, lift it up by simply holding
the rack sides, as soon as the rack is stable in
its upper position.
To restore to the lower position, press the levers A at the sides of the
rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids
should ideally be placed at the sides to avoid interferences with the
spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
GLASS CARE
Dedicated accessory that
allows you to safely store
dierent types of stem
glasses in the lower rack.
It enables cleaning &
drying results by allowing
an optimised and stable
positioning of the glasses.
DYNAMIC CLEAN IN LOWER RACK
Dynamic Clean uses the special water
jets in the rear of cavity to wash more
intensively the high dirty items.
Placing the pots/casseroles faced to the
Dynamic Clean® component please acti-
vate the DYNAMIC CLEAN on the panel.
The lower rack has a Dynamic Clean, a special pull-out support in the
rear of the rack that can be used to support frying pans or baking pans
in upright position, thus taking up less space.
How to use Dynamic Clean:
1. Adjust the Dynamic Clean area (G)
folding down the rear plate holders
to load pots.
2. Load pots and casseroles inclined
vertically in Dynamic Clean area.
Pots have to be inclined towards
the power water jets.
2
3
1
1
3
2
A
B