KSM3311X W10747071B_EN_v01.
PARTS AND FEATURES PARTS AND ACCESSORIES Attachment hub Motor head Beater shaft Flat beater Speed control Bowl Wire whip Dough hook Flex Edge beater* Pouring shield* 2 | PARTS AND FEATURES W10747071B_EN_v01.
wl ENGLISH STAND MIXER SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To avoid risk of electrical shock, do not put Stand Mixer in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug the Stand Mixer from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts.
STAND MIXER SAFETY 10. Do not let the cord contact hot surfaces, including the stove. 11. Remove the flat beater, wire whip, or spiral dough hook from the Stand Mixer before washing. SAVE THESE INSTRUCTIONS THIS PRODUCT IS DESIGNED FOR HOUSEHOLD USE ONLY. ELECTRICAL REQUIREMENTS Voltage: 120 V Frequency: 60 Hz Wattage: 250 Watts NOTE: The power rating for your Stand Mixer is printed on the serial plate. Do not use an extension cord.
ENGLISH USING THE STAND MIXER SPEED CONTROL GUIDE All speeds have the Soft Start® feature which automatically starts the Stand Mixer at a lower speed to help avoid ingredient splash-out and “flour puff” at start-up, then quickly increases to the selected speed for optimal performance. NOTE: The speed control can be set between the speeds listed in the chart to obtain speeds 1, 3, 5, 7, and 9 if a finer adjustment is required.
USING THE STAND MIXER ASSEMBLING THE STAND MIXER 1 Check to be sure that the Stand Mixer is unplugged, and the speed control is turned to “0”. 2 Raise the motor head: Slide the locking lever to the unlock position and lift the motor head. Once lifted, slide the locking lever to the lock position to keep the motor head up. 4 Attach any accessory: Slip the accessory onto the beater shaft and press upward as far as possible.
ENGLISH USING THE STAND MIXER ASSEMBLING THE STAND MIXER 5 Lower the motor head: Slide the locking lever to the unlock position and guide the motor head down. Make sure motor head is completely down, then slide the locking lever to the lock position. Before mixing, test lock by attempting to raise motor head. (OPTIONAL) To adjust beater to bowl clearance: Tilt the motor head back; then turn the screw slightly counterclockwise (left) to raise the beater, or clockwise (right) to lower the beater.
USING THE STAND MIXER OPERATING THE STAND MIXER NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended mixing time, the top of the unit may become hot. This is normal. 1 Plug the Stand Mixer into a grounded 3 prong outlet. Always set the speed control lever on lowest speed to start, then gradually increase speed to avoid splashing ingredients. See the “Speed control guide” to select the best speed for your recipe.
NOTE: The pouring shield* can be used to avoid ingredients splashing out of the bowl when mixing as well as to easily pour ingredients in the bowl while mixing. ENGLISH USING THE STAND MIXER (OPTIONAL) Pour ingredients into the bowl through the pouring chute. DISASSEMBLING THE STAND MIXER 1 Raise the motor head: Check to be sure that the Stand Mixer is unplugged, and the speed control is turned to “0”; then slide the locking lever to the unlock position and lift the motor head.
USING THE STAND MIXER OPTIONAL ATTACHMENTS KitchenAid offers a wide range of optional attachments such as the spiralizer, pasta cutters, or food grinder that may be attached to the Stand Mixer attachment power hub as shown here. 1 Check to be sure that the Stand Mixer is unplugged, and the speed control is turned to “0”. 3 Insert attachment into attachment hub, making certain that attachment power shaft fits into the square attachment hub socket.
ENGLISH CARE AND CLEANING CLEANING THE STAND MIXER IMPORTANT: Do not wash the wire whip in the dishwasher. Do not immerse the Stand Mixer body in water or other liquids. These parts should be hand washed. 1 Turn Stand Mixer off and unplug before cleaning. Wipe the Stand Mixer body with a soft, damp cloth. Do not use household/commercial cleaners. Wipe off the beater shaft frequently to remove any accumulation of residue. Do not immerse in water. 3 The wire whip is not dishwasher safe.
TROUBLESHOOTING If your Stand Mixer should malfunction, please check the following: 1. The Stand Mixer may warm up during use. Under heavy loads with extended mixing time periods, you may not be able to comfortably touch the top of the unit. This is normal. 2. The Stand Mixer may emit a pungent odor, especially when new. This is common with electric motors. 3. If the flat beater hits the bowl, stop the Stand Mixer. See the “Assembling the Stand Mixer” section and adjust the beater to bowl clearance. 4.
ENGLISH WARRANTY AND SERVICE KITCHENAID ® STAND MIXER WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA This warranty extends to the purchaser and any succeeding owner for Stand Mixers operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada. Length of Warranty: One Year Full Warranty from date of purchase. KitchenAid Will Pay for Your Choice of: Hassle-Free Replacement of your Stand Mixer.
WARRANTY AND SERVICE HASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Stand Mixer should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Stand Mixer returned to us.
