Operation Manual
2
A
HAMMER DRILL 850W
1 APPLICATION
The hammer drill can be universally used for hammer drilling and chiselling in stone and concrete. It is not
designed for commercial use.
WARNING! For your own safety, read this manual and the general safety instructions
carefully before using the appliance. Your power tool should only be given to other users
together with these instructions.
2 DESCRIPTION (FIG. 1)
1. Dust guard
2. Fastening sleeve
3. On-O switch
4. Handle attachment
5. Cap for carton brush
6. Depth stop
7. Drill stop
FIG. 1
3 PACKAGE CONTENT LIST
• Remove all packaging materials.
• Remove remaining packaging and packing inserts (if included).
• Check that the package contents are complete.
• Check the appliance, the power cord, the power plug and all accessories for transportation damage.
• Keep the packaging materials as far as possible until the end of the warranty period. Then take it to your
local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with plastic bags!
There is a danger of suocation!
1 pc machine
3 pcs SDS drill (8/10/12x150mm)
2 pcs chisel (14X250mm,1pc point ,1pc at )
1 pc chuck with key and DS adapter EXTRA
1 pc grease
1 set carbon brush
1 pc manual
If any parts are missing or damaged, please contact your dealer.
71788 manual.indd 2 13-01-11 08:39