" pyromania KINGS TO! LIMITED WARRANTY Al parts of this Kingston Brass faucet ars warranted to the original retail purchaser fo be free from defects in material and workmanship for & period of Ten(10) years from the date of purchase as shown on the purchaser's receipt s This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION ON| e N INSTRUCTIONS For Use With KB's Wall Mount Twin Handles Kitchen Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. (1] (2] 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid Sipping small parts. Remove old faucet 2. Turn on old faucet to remove any excess water in the supply lines. Apply Teflon tape onto both threads of supply elbows. L} Washers 3.
Replacement Parts: Parts: Hat Cartridge DISRUPT! 000HC “ 5 2% Cold Cartridge: 2 KSRPT1000CC % Hot Handle: KBH1791 AXH Cold Handle: KBH1781 AXC \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing.
