0 YEAR MANUFACTURER'S KINGSTON BRASS LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free azn lies from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt.
Te 5 INSTALLATION INSTRUCTIONS For Use With KB's Widespread Lavatory Faucet with or without Pop-Up BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing Ne Tools: C= F=f) EE: Ly, Se Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant ~~ Screwdriver 1 Spout Hardware Lock Nut “Washer Toe Connector 1. Remove the Tea Conn actor and spout mounting hardware from spout 2.
Parts: Replacement Parts 8 Hot Cartridge: FSCRP1971HC (Cold Cartridge: FSCRP1871CC| a Hot Handle: FSCH1871AKLH a Cold Handle: FSCH1971AKLC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.
Mounting nut installation instr To install the mounting hardware: 1. Unscrew Both adjustment screws as much as possible without removing them. 2. Thread lockout onto the valve assembly and slip on the metal washer. 3. Once the valve assembly has been secured from the top, hand tighten brass lockout all the way to the top. Tight the nut to flush with steel washer and secure the valve by hand. 4. Gently secure the screws to lock the valve assembly in place use only a Phillips head screw driver.
