0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Deck Mount Tub/Shower Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after fishing. Ned Tools: Pel) =P o Basin Wrench Adjustable Wrench Teflon Tape %fi% Silicons Sealant Screwdriver (1] Apply Teflon tape 1. Shut off main water supply valve before installation. 2 Apply Teflon tape on the threads of the copper shank. Install the risers. &. Place a washer between the side hole of the shower 6.
Replacement Parts: Hot Cartridge: KSRPT2000HC Cold Cartridge: KSRPT2000CC Q = Diverted Cartridge: KSRPT2001DC Cold Handle: KSH28B1ZXC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.
