Use and Care Guide

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Mounting the fan-motor assembly

(standard mount)

□

Align the locking slots of the canopy (C) with the two screws

(DD) and alignment post (KK) in the mounting bracket (A).

□

Push up the canopy (C) and turn clockwise until the alignment

post (KK) engage to the round hole and the screws (DD)

engage to the key slots.

□

Firmly tighten the two mounting screws (DD).

□

Align the oval shape on the canopy (C) with canopy bottom

cover (D), Push up the canopy bottom cover (D) until the screw

(DD) heads engage to the slots on the canopy bottom cover (D)

so that the magnetic canopy bottom cover (FF) can be attached

to the bottom of the canopy (C) properly.

Assembly - Hanging the Fan (continued)

Installing the blades to the blade

brackets

□

Attach a blade (H) to the blade arm (I) by aligning the holes on

the blade support plate (J) with the holes on blades (H) and

blade arms (I), inserting the screws (AA) into the holes in the

blade support plate (J) and through the blade (H) and blade arm

(I).

□

Tighten each screw to secure the blade (H).

□

Repeat this step for each blade (H) and blade arm (I).

Assembly - Attaching the Fan Blade

Attaching the blade assemblies to

the motor

□

Attach the blade assembly to the motor assembly (F) by

aligning the screw holes on the blade arm (I) with the screw

holes on the bottom of the fan motor assembly (F). Insert the

screws (BB) into the holes on the blade arm (I) and through the

holes on the bottom of the fan motor assembly (F), and tighten

each screw to secure the blade assembly.

□

Repeat this step for the remaining blade assemblies.