User Manual

6.4 Memory Card
Chapter 6 Handheld Programmer
1-233
1
6
NEW PROGRAM mode or OFFLINE EDITOR
Function
Saves a new program in the memory card.
• Use this function to save the new program currently on the programmer into the
memory card.
• Up to 3 alphanumeric characters (0 to 9 and A to F) and up to 6 numeric char-
acters can be used respectively to specify the program name and date.
Example: Program name: ABC, date: 10-11-99
• If necessary, press
ON
or
OFF
to move the cursor up or down to change the
program name and date.
• Be sure to check beforehand that the memory card has enough storage capac-
ity available for saving the new program.
• Assign each program a name distinct from other programs.
Desired Nos. (0 to 9) can be entered as a date for use as a version No.
Key operation Display Description
00000
Display arbitrary line in program.
LD 00000
FREE: 44 PROGRAM
Available storage capacity is displayed.
486 BLOCK
CARD -> NEW
Select "NEW".
ACCS CLEAR
NAME: 000 New display appears for entry of
DATE: 00-00-00 of program name and date.
NAME: ABC
Enter program name.
DATE: 00-00-00
NAME: ABC
Cursor moves down for date entry.
DATE: 00-00-00
NAME: ABC
Enter date.
DATE: 10-11-99
ABC: SAVE A prompt appears for confirmation.
EXEC. OK?
FREE: 48 PROGRAM Saving is completed and available
504 BLOCK storage capacity is displayed.
00000
Return to initial display.
LD 00000
ENT
R-SRCH
MON
CARD
CLEAR
ENT
R-SRCH
ENT
R-SRCH
OFF
ENT
R-SRCH
SET
1
RES
0
SET
1
OFF
SET
1
MPS
C
LDB
4
OUT
A
OUB
B
OR
9
KVHKA Chap 06_3&4&5.p65 08.3.11, 11:17 AM233