User Manual

9
6-1. Response Time
Longer response times lead to more stable detection.
 LR-TB2000/TB2000C
 LR-TB2000CL
6-2. Output Logic
Select N.O. or N.C. for the output logic. For details, see "4 Detection Mode" (page 4).
6-3. Output Mode
 Standard [Standard]
The output is activated according to the detecting distance. For details, see "4 Detection
Mode" (page 4).
 Window [Window]
The output is activated according to the detecting distance. For details, see " 4-3.
Window Mode" (page 5).
 Stability [Stability]
This function can be used to check whether there has been a decrease in the amount of
light received due to problems such as dirt on the detected surface.
z When the I/O selection is [Out1 + Out2]
Output is activated if the amount of light received falls below the threshold (fixed value)
during the observation period.
Example) Chart during DATUM mode
 Error [Error]
Output is activated when an error occurs. When the error is cleared, the output is also
automatically reset. For causes of errors, see " Error Display" (page 10).
6-4. Timer
This function can be used to delay the timing with which the sensor output is switched.
• Off delay [Off-delay]
• On delay [On-delay]
• One shot [One shot]
Detecting
distance
[mm]
Repetition Accuracy[mm] (Typical) (Under stable temperature)
White Paper (Reflectivity: 90%)
Response Time [ms]
1 10 25 100 1000
1000±9±4±3±3±3
2000 ±25 ±7 ±6 ±3 ±3
Detecting
distance
[mm]
Repetition Accuracy[mm] (Typical) (Under stable temperature)
Gray Paper (Reflectivity: 18%)
Response Time [ms]
1 10 25 100 1000
1000 ±26 ±7 ±6 ±3 ±3
2000 ±69 ±21 ±13 ±6 ±4
Detecting
distance
[mm]
Repetition Accuracy[mm] (Typical) (Under stable temperature)
White Paper (Reflectivity: 90%)
Response Time [ms]
2 20 50 200 2000
1000 ±10 ±5 ±3 ±3 ±3
2000 ±26 ±8 ±7 ±5 ±3
Detecting
distance
[mm]
Repetition Accuracy[mm] (Typical) (Under stable temperature)
Gray Paper (Reflectivity: 18%)
Response Time [ms]
2 20 50 200 2000
1000 ±26 ±9 ±6 ±3 ±3
2000 ±71 ±22 ±15 ±9 ±5
Detection Mode Observation Period
DATUM
Negative setting value < detected value
< positive setting value
Distance Detected value < setting value
Window
LOW-side setting value < detected value
< HIGH-side setting value
NEAR
FAR
Distance
Setting value
A
mount of
received light
(workpiece >
background)
Amount of
received light
threshold (fixed)
Stability
output
(N.O.)
5 cycles
1567
1234
XX-XXXX
DISP MODE
1
2
ON
OFF
ON
OFF
ON
N.O.
N.C.
FAR
NEAR
OFF
ON
OFF
ON
N.O.
N.C.
OFF
ON
OFF
ON
N.O.
N.C.
OFF
ON
OFF
ON
N.O.
N.C.
OFF
Timer OFF
Off Delay
On Delay
One Shot
Timer time