User Manual
2-2 Connecting HR-UC51
2-6
2
Connections
■ Communication settings
The default settings for HR-UC51 are as follows. The setting values can be changed.
Make sure that the settings for HR-UC51 and the connected computer are the same.
• Baud rate : 9600bit/s
• Data length : 7 bit
• Parity : Even
• Stop bit : 1 bit
• Communication protocol : Non-procedure
■ Connecting to DV-90 Series
To connect to DV-90 Series, the conversion connecter is necessary as below.
Use the following conversion connector.
• Manufacturer : ELECOM Inc.
• Product name : Serial Reverse Adaptor
• Model : AD-R9
CAUTION
•
Be sure to use the supplied AC adaptor or optional AC adaptor. Using other
power sources may result in fire, electric shock or product malfunctions.
• Power is supplied from the AC adaptor. Power is not supplied from the D-sub
connector.
DV90
RS-232C
Conversion Connecter
(D-sub9 pin)
HR-UC51