Let’s get brewing.
When using electrical appliances, basic safety precautions should always be followed, including the following: 1. 2. 3. 4. For household use only. Do not use distilled water. Scalding may occur if the handle is opened during the brewing process. 5. Do not touch hot surfaces. Use handles or knobs. 6. To protect against fire, electric shock, and injury to persons do not immerse appliance, cord, or plugs in water or other liquid. 7.
1. WARNING: Keep all plastic bags away from children. 2. CAUTION: Keurig® recommends using only Keurig® My K-Cup® Reusable Coffee Filter and Keurig® approved K-Cup® pods in this appliance. The use of non-Keurig® pods or accessories may cause brewer malfunction or injury. 3. CAUTION: There are two sharp needles that puncture the K-Cup® pod, one above the K-Cup® pod holder and the other in the bottom of the K-Cup® pod holder. To avoid risk of injury, be aware of the needle locations. 4.
Before You Brew STRONG 2. Pour Power Button STRONG 1. Fill (8oz) 3. Place Plug & Power Remove packing tape from brewer. Pull plug and extend cord from cord storage located at the back of the brewer. Plug into a grounded outlet. Press the power button. The power button will illuminate. Fill & Place Add 1 cup (8oz) of water into a mug. Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines.
STRONG Brew Button STRONG STRONG Brew Indicator Lift & Lower Lift and lower the handle. Do not insert a K-Cup® pod. The brew indicator light will flash to indicate that the brewer is ready. Cleansing Brew Press the brew button. The brew indicator light will illuminate solid, then begin to pulse while the brewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the water will begin to dispense. Pour the hot water into the sink.
Brew Your First Cup 2. Pour STRONG STRONG STRONG Brew Indicator 3. Place Fill & Place Mug Add desired amount of water into a mug (6oz minimum, 12oz maximum). Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray. Lift & Place Pod Lift the handle. Place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid.
STRONG Brewer Features STRONG Brew Button Strong Brew increases your coffee strength and intensity. For bolder coffee press the STRONG button. Pod Storage holds 9 K-Cup® pods and fits in your brewer to save counter space. Removable Water Reservoir for easy cleaning and filling. Auto Off: Automatically turns your brewer off 90 seconds after the last brew for energy savings. Cord Storage: Makes transporting your brewer convenient and keeps countertops tidy.
cleaned periodically with a damp, soapy, nonabrasive cloth. Rinse the reservoir thoroughly after cleaning. This will ensure that no cleaning solutions remain in the area as they may contaminate the water supply. Do not dry the inside of the water reservoir with a cloth as lint may remain. Exit Needle Remove the pod holder assembly and detach the funnel. Locate the exit needle on the inside bottom of the K-Cup® pod holder. Insert a straightened paper clip into the exit needle to loosen any coffee grounds.
