Cassette Player User's Manual

— 27 —— 27 —

■ Removing the hard rubber frame

2 When the lower level is removed, remove the upper two

locations.

The frame can be removed from the top side in the same manner.

Catch

Lock

1 Engage the catch pins on the removal tool and remove the two

locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Accessory2 Removal tool

■ Removing the Unit

4 Lower the removal tool

toward the bottom, and pull

out the unit halfway while

pressing towards the inside.

5 Pull the unit all the way out

with your hands, being

careful not to drop it.

Be careful to avoid injury from the catch pins on the removal tool.

1 Refer to the section "Removing the hard rubber frame" and

then remove the hard rubber frame.

2 Remove the screw (M4×8) on the back panel.

3 Insert the two removal tools deeply into the slots on each side,

as shown.

Screw (M4X8)

(commercially

available)

KRC-394(E)_U.S r1 02.9.24 11:11 AM Page 27