user manual

57
EN
Knowledge section
Display message list
Displayed Message
BLANK DISC
BUFFER OVER
CAN'T COPY
CAN'T EDIT
DISC ERROR
DISC FULL
MD NO DISC
NO TRACKS
PLAY ONLY
PROTECTED
READING
TEXT FULL
TITLE FULL
UNIT ERROR
WRITING
Meaning
= No MD is inserted in the unit.
= An attempt is made to perform high-speed recording of more than 30 discs
within 74 minutes.
= An attempt is made to record digital signal from a source while its digital copy
has been prohibited by SCMS.
= An attempt is made to edit a track which is too short.
= The contents of UTOC* are abnormal. In this case, perform "ALL ERASE"
operation (page 43). If this is not possible, use another disc.
= There is no recordable area on the disc or an attempt is made to record a
256th track. In this case, use another recordable disc. Note that more than
255 tracks cannot be recorded on a disc.
= An MD is not inserted.
= The MD disc does not contain any track but has a disc title.
= The inserted MD is a playback only disc.
= The inserted MD is write-protected. In this case, enable the recording (page
53).
= The TOC* information in the disc is being read.
= An attempt is made to display the text information of a CD TEXT disc
containing more than 1 kB of text information.
= An attempt is made to assign a title with more characters than usable. See
"Total number of title characters" (page 33).
= There is some trouble with the unit. Return to normal condition may be made
by turning the unit OFF then ON again.
= The data related to editing or recording is being written in the disc.
* All minidiscs contain a Table of Contents (TOC) in addition to sound signals. The TOC is similar to the table
of contents in a book and contains information, such as track numbers, track length, and character information,
that cannot be rewritten.
In addition to the TOC, minidiscs also contain a special User’s Table of Contents (UTOC) that contains track
number, track length, and character information, that can be rewritten.