INSTRUCTION MANUAL STEREO CASSETTE DECK CT-203, CT-2050, KXF-W4010, KXF-W6010

9
CT-2050/203/KXF-W6010/W4010 (En/M)
Controls and indicators
1 Deck A
This deck is used exclusively for play-
back. (CT-203/KXF-W4010 only)
This deck is capable of both playback
and recording. (CT-2050/KXF-W6010
only)
2 Deck A eject (0) key 0
Press to open the cassette holder of
deck A.
3 Deck B eject (0) key 0
Press to open the cassette holder of
deck B.
4 Deck B
This deck is capable of both playback
and recording.
5 Deck A operation keys 0~!
1 :Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡ :Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
2, 3 :Play keys
7 :Stop key (Stop)
6 POWER switch 0
Press to turn this unit ON and OFF.
7 PHONES jack !
Connect stereo headphones (optional)
here.
8 TIMER switch £
This switch is used in setting of timer
playback and timer recording.
9 MODE key ^
Press to change the recording
level,balance,or bias settings.
0 Deck B operation keys 0~!
2, 3 :Play keys
7 :Stop key (Stop)
1 :Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡ :Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
PAUSE (
8) key !
:Press to let tape transport pause
temporarily.
REC/ARM (
¶) key ^
:Press in stop mode to start re-
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
! Deck A PAUSE (
8) key (CT-2050/
KXF-W6010 only) !
Press to let tape transport pause tem-
porarily.
@ Deck A REC/ARM (
¶) key (CT-2050/
KXF-W6010 only) ^
Press in stop mode to start recording or
press in record mode to let the record-
ing pause after leaving a non-recorded
blank of 4 seconds.
# RESET A key !
Press to reset the tape counter of deck
A to “0000”.
$ DOLBY NR key 0
Press to switch the Dolby Noise Reduc-
tion mode to B = C = OFF. This makes
it possible to use the Dolby NR effect in
recording and playback.
% REV. MODE key 0
Press to change the tape transport di-
rection.
^ RELAY REC key (CT-2050/KXF-W6010
only) (
Press to perform continuous recording
from deck A to deck B.
& DUBB. keys (NORM./HIGH) (CT-2050/
KXF-W6010 only) )
DUBBING keys (NORMAL/HIGH) (CT-
203/KXF-W4010 only) )
Press to start tape dubbing.
NORM./NORMAL
: Dubbing at the normal
speed.
HIGH : Dubbing at a high speed.
* MPX FILTER key &
Press to reduce beat noise when record-
ing FM broadcasts.
( CCRS key ™
Press to start recording after automatic
setting of the optimum CD recording
level and optimum tape recording bias.
) AUTO BIAS key ^
When this key is pressed, the bias level
appropriate for the tape is set automati-
cally for recording.
¡ RESET B key
Press to reset the tape counter of deck
B to “0000”.
™ REC LEVEL/BAL./BIAS knob (CT-
2050/KXF-W6010 only) ^
Adjust this before recording.
£ REC LEVEL/BAL. knob (CT-203/KXF-
W4010 only) ^
Adjust this before recording.