Owner manual

English
|
25
Calling a number in the call log
1
Enter Bluetooth mode
KDC-BT50U
Press the [ ] button.
KDC-5047U KMR-440U
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Select the call log mode
Turn the Control knob to select “Incoming
Calls”, “Outgoing Calls”, or “Missed Calls”, and
then press the [ENTER] button.
“Incoming Calls”: Incoming calls
“Outgoing Calls”: Outgoing calls
“Missed Calls”: Missed calls
3 Select a name or phone number
Turn the Control knob.
4 Make a call
KDC-BT50U
Press the [ ] button.
KDC-5047U KMR-440U
Press the [ENTER] button.
⁄
• The display changes in name, telephone number, and time-
stamp whenever pressing the [ENTER] button. (
KDC-BT50U )
• The outgoing call list, the incoming call list, and the missed
call list, are the lists of calls originated from and received
at this unit. They are not the ones stored in the cell-phone
memory.
Speed dialing (Preset dial)
1
Enter Bluetooth mode
KDC-BT50U
Press the [ ] button.
KDC-5047U KMR-440U
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Select the number you want to recall from the
memory
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the [ENTER]
button.
3 Make a call
KDC-BT50U
Press the [ ] button.
Registering to the Preset Dial Number
List
1
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the Phone Book
2 Enter Preset Memory mode
Press the [ ] button.
3 Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press the
[ENTER] button for at least 2 second.
Cancelling the Preset Memory mode
Press the [ ] button.
KDC-5047U KMR-440U
Press the [ENTER] button.
⁄
• You need to register the preset dial number. Refer to
<Registering to the Preset Dial Number List> (page 25).
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode
Push the Control knob towards right or left.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the Control knob.