CD Receiver Instruction Manual

English
|
25
Function of KTC-HR300
iTunes Tagging
By using an iTunes Tagging enabled HD Radio you
can tag your music. When you hear a song you
enjoy on your local HD Radio station, you only have
to press the [ENTER] button. The song’s information
will then be saved on this unit. The saved songs
will then show up in a playlist called “Tagged” in
iTunes the very next time you sync your iPod to
your computer. Then you just need to click and
then easily buy and download the song you were
tagging directly from the Apple iTunes Music Store.
1 Enter HD Radio iTunes tagging mode
Press the [ENTER] button.
“
TAG
” will be indicated on the display when song
information can be registered.
“TAG Storing” is indicated on the display while a tag
is being stored to this unit. “TAG Stored” is indicated
on the display after a tag is stored.
“TAG Transferred” is indicated on the display after a
tag is stored to your iPod.
⁄
• Turn “ON” the 41 iTunes Tagging of <Function setting> (page
16) when using this function.
• Up to 50 TAGs (song’s information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected iPod.
• The memory usage can be checked by selecting
40 Memory
count display of <Function setting> (page 16).
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2 Select Tuning item
Press the [DIRECT] button on the remote
control.
Pressing the [DIRECT] button each time switches
the following tuning items as follows.
Tuning item Display
Frequency “– – – –”
Channel “CH –” / “HD –”
Cancelling Direct Access Tuning —
3 Enter the frequency or Channel
Press the number buttons on the remote
control.
Example of frequency input:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4 Do Direct Access Tuning
Press the [4] or [¢] button on the remote
control.
Cancelling Direct Access Tuning
Press the [ ] button on the remote control.