User's Manual

20 English
Registering to the Preset Dial Number
(Preset Memory)
2 Enter the phone number with reference
to the following:
Dial a number/ Calling a number in the call
log/ Calling a number in the Phone Book
3 Press and hold number button (1 – 6) for
about 2 seconds.
Make a Voice Dialing Call
2 Turn the volume knob to select “VOICE
RECOG”, then press to enter.
“V-RECG READY” is displayed.
3 Press the volume knob to start voice
recognize.
4 “PB NAME” is displayed.
When a beep is heard, say the name within
2 seconds.
5 “PN TYPE” is displayed.
When a beep is heard, say the category
name within 2 seconds.
The recognized phone number (name) is
displayed.
6 Press the volume knob to make a call.
■
This step is the same as step 4 of the
procedure in <Calling a Number in the
Phone Book> (page 19). You can make a
call or select a category.
■
If your voice cannot be recognized, a
message is displayed. Pressing the Volume
knob allows you to retry voice input. Refer
to <Troubleshooting> (page 37).
■
Both the name and category require
registration of a voice tag. Refer to <Setting
a Voice Command> (page 23).
■
Audio sound is not output during voice
recognition.
Receiving a Call
Answering a Phone Call
Press the volume knob.
Rejecting an Incoming Call
Press SRC.
During a Call
Disconnecting a Call
Press
SRC.
Switching to the Private Mode
Press number button 6 to switch
between Private talk (“PRIVATE TALK”)
and Hands-free talk (“HANDS FREE”).
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
Turn the volume knob to select
[ANSWER], then press to enter.
Continuing the Current Call
Turn the volume knob to select [REJECT],
then press to enter.
Switching between the Current Call and
Waiting Call
Press the volume knob to switch the
calling party.
Clearing the Disconnection
Message
Press and hold the volume knob.
“HF DISCONCT” disappears.
B64-4833-00_01_E.indb 20B64-4833-00_01_E.indb 20 11/03/07 11:0911/03/07 11:09