Owner's Manual
Table Of Contents
- Quick Start Guide (Downloaded from Vendor Web Site)
- Instruction Manual (Downloaded from Vendor Web Site)
- Warranty
52
|
KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U
English
|
53
Contents
Bluetooth setup
Function of KDC-X896, KDC-BT852HD
Registering the PIN code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
Enter the Bluetooth mode
Press the [ ] button.
“BT MODE” is displayed.
Enter the Function setting mode
Press and hold the Control knob.
Select the PIN code edit item
Select the following items using the Control
knob.
“Settings” “Detailed Settings”
“PIN Code Edit”
Input the PIN code
Operation type Operation
Selection of numbers Turn the Control knob.
Movement to the next digit Push the Control knob rightward.
Deletion of the last digit Push the Control knob leftward.
Transmission of PIN code Press the Control knob.
If “Completed” is displayed, registration is complete.
Exit the Bluetooth mode
Press the [SRC] button.
⁄
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.
Downloading the phone book
You can download the phone book data from the
cell-phone to this unit so that you can use the
phone book of this unit.
Downloading automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
“Completed” is displayed, your cell-phone may not support
a phone book data automatic downloading function. In this
case, try downloading manually.
Downloading from the cell-phone manually
Operate the cell-phone to end the hands-free
connection.
Operate the cell-phone to send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• Duringdownloading:
“Downloading” is displayed.
• Aftercompletionofdownloading:
“Completed” is displayed.
Operate the cell-phone to start the hands-free
connection.
Clearing the downloading completion message
Press any button.
⁄
• Up to 600 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer characters
can be input depending on the type of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
Displaying the firmware version
You can view the version of the firmware of this
unit.
Enter the Bluetooth mode
Press the [ ] button.
“BT MODE” is displayed.
Enter the Function setting mode
Press and hold the Control knob.
Select the Bluetooth firmware update item
Select the following items using the Control
knob.
“Settings” “Detailed Settings”
“BT F/W Update”
The firmware version appears.
Exit the Bluetooth mode
Press the [SRC] button.
⁄
• For how to update the firmware, access our web site.
www.kenwood.com/bt/information/